Featured post

Sunday 27 November 2022

Zg 1 and Fz 1 Identification Lights:

 

Zg 1 is maintained as per convention on the F0 Function Key and directional using the Function Outputs LF and LR.

Fz 1 is achieved by using an unconventional method of the connections of NC1 & NC2, COM1 & COM2, and NO1 & NO2 across both Relays.

Using Function Output 1 to operate the pair of Relays and Output 2 for the lights Fz 1, assigned to the standard Massoth configuration and operated by the F8 Function Key, single light on front and rear irrespective of direction when in Shunting Mode, CV 59 Switching speed (Half Speed) Function Key command allocation.

When in Shunting Mode, activation - deactivation of the acceleration - deceleration setting  according to the values of CV 3 and CV 4 may be disabled by a Function Key, the value of which is stored in CV 64, by default set to 0, recommended setting is to use Function Key 7, in this scenario CV 64 is set to 8. 

When Shunting Mode is deactivated via the F8 Function Key, Fz 1 extinguish, and Zg 1 operates as per normal, and as per direction of travel, and the acceleration - deceleration settings are returned to values as set in CV3 and CV 4.


Further details and info on the SCHRACK Relay.